cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
315
Views
0
Helpful
1
Replies
Highlighted
Beginner

UCS460 M1 with single drive

Hello,

Anybody know if theres any way to make a UC460 to be installed with one hard drive only?. I didn't realized this servers are coming without the RAID card.

Best regards.

Victor

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

UCS460 M1 with single drive

Hi Victor,

To the best of my knowledge you need a RAID card installed in the riser to use the hard drives as there is no onboard SAS chipset.

Here is the spec sheet with the applicable part numbers for the RAID controllers:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644207.pdf

1 REPLY 1
Cisco Employee

UCS460 M1 with single drive

Hi Victor,

To the best of my knowledge you need a RAID card installed in the riser to use the hard drives as there is no onboard SAS chipset.

Here is the spec sheet with the applicable part numbers for the RAID controllers:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644207.pdf

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards