I am trying to understand the UCS, When I boot the server (Chassis-1 Server-2) from UCS, & KVM to it, then Reset it, it can boot from SAN, but it get allocated IP address from somewhere as shown in attached picture.
1) Where this IP address is coming from ? unable to change it till I login to it :(
2) I have forget its password, how I can change the reset the password for it.?
Mega raid option does not appear when the server comes to the bios screen, I see the Megar aid PCI card when I look at the bios but I can not do in the configuration because all setting is disable. There are three from this server and they all have t...
•This field guide is meant to be used by customers for cleaning up an existing HyperFlex Edge deployment for the purposes of reinstalling.
•The procedures in this guide are DESTRUCTIVE. Make sure all VMs and data are backed up before proceedi...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...