I have two FI 6140xp, 11 chassis, and i´m planning to upgrade its UCSM and firmware, from 1.4(L) through 2.0(5) but i need to know if this is the last stable version (2.0(5)), or if exists another upper stable version.
I wanted to add that the latest release will include the most resolved caveats, and you'll also want to ensure that once you upgrade the firmware, you upgrade any OS / Hypervisor ENIC and FNIC drivers as well. As Kenny and Manuel pointed out, read the release notes and check with your System Engineer before making a decision to move forward. Please also remember to read and resolve any "gotcha's" outlined in the release notes before upgrading.
Take Special Note of this Section:
"Cautions, Guidelines, and Limitations for Firmware Upgrades"
Step by Step Process to Find UCS Drivers and Install on UCS-C series(Rack Servers)
How to find Compatible Drivers:
Use Cisco UCS HCL Tool to Find the Drivers:
Select the options in the drop down as p...
Cisco UCS Platform Emulator, Release 4.2(2aPE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported...
Our partnership with NetApp is stronger than ever with joint engineering development of the new FlexPod XCS. Introducing a new level of visibility and automation that can help propel your journey to hybrid cloud. The Cisco Intersight™ cloud operations p...
There is a prevalence of network threats across the world, and the rate, at which these threats continue to emerge, is more rapid than ever before. Cisco Next Generation Firepower (CNGFW) security technologies is information security service that provides...
Upload the Script to Datastore
1. Browse to any Datastore of ESXi Host2. Upload the folder "lsigetvmware_022817" ex. Suppose the datastore name is "Datastore3"
Run the Commands
Enable SSH of ESXi Host
SSH to ESX...