Upgrade failure 2.2.3d to 2.2.6d

[Walter Dey]

We had 5 UCS domains, which we wanted to upgrade from 2.2.3d to 2.2.6d.

We used autoinstall.

3 out of 5 worked ok

2 were hanging  "waiting for activation to complete on peer fabric interconnect" at 97%

see attachments.

We opened TAC case; however, due to the fact that no webex call was possible due to administrative reasons, no solution was possible.

Any known bugs ?

PS.

All possible tricks were tried, without success

e.g. triggering another autoinstall with force

terminating autoinstall and manual activate

.....

[Kirk J]

I am curious as to what the console serial connection shows, for the unresponsive fabric interconnect?

It does sound similar to what we see for the /opt corruption issue, when the FI doesn't boot up due to flash or file system corruption.

Thanks,

Kirk..

[Qiese Dides]

Hi Walter,

Exactly as Kirk said it seems you are running into the bug that I posted on the other forum discussion you brought up. These problems are looking like they go hand in hand together.

I went ahead and linked you the bug on the other forum.

 

https://tools.cisco.com/bugsearch/bug/CSCut63966

Let us know of any updates.

Qiese Dides