cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
250
Views
0
Helpful
2
Replies

What could be the reasons why a server ucs c 210 m2 during the power on process to get stuck in the hardware test?

ccarloscorrea
Level 1
Level 1

hi guys,

the server to power it gets stuck in the process of test hardware, the server displays the following message on screen "configuring and testing platform hardware" and not proceed to load the OS. The server maintains this behavior after which restart unexpectedly. can someone help me to tell me that may be happening.

2 Replies 2

Walter Dey
VIP Alumni
VIP Alumni

We need more information !

- standalone or UCS managed ?

- hardware configuration, CPU, memory, I/O adaptor

- CIMC, BIOS version

- OS installed on local disk ?

- which OS ?

Manuel Velasco
Cisco Employee
Cisco Employee

Hi Carlos,

Most likely your server has a corrupted bios and you need to recover the bios.   The best way get this is by doing the BIOS recovery using the documentation below.  The recovery image that you need to put on the USB flash drive can be found in the HUU iso, you will need to extract this image and some folder inside the iso to get to this recovery iso. Note that you want to select the same firmware version that your system is currently running.   You can download this image using the second link below.

 

Using the BIOS Recovery Jumper J1E5 to Recover Corrupt BIOS

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C210M1/install/C210M1/install.html#wp1349053

 

Cisco UCS C210 M2 Rack-Mount Server Software

http://software.cisco.com/download/release.html?mdfid=283862069&softwareid=283850974&release=1.4%283v%29&relind=AVAILABLE&rellifecycle=&reltype=latest

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: