About francisco.trigo

francisco.trigo · 06-20-2017

Hi there! What I'm trying to implement with my cisco router is use it into a FreePBX (Asterisk) PBX as analog gateway for lines and FXS subscriber for analog phones. All is working great, but I have a little issue with dial.patterns when i dial a cal...

francisco.trigo · 06-03-2017

Hi there! I have a cisco router as a WAN router, is my home gateway router. I set it like FXS & FXO gateway. I'm using it with asterisk and FreePBX. Now all looks great at works perfect, but talking about security some is really wrong with my config...

francisco.trigo · 01-01-2017

Hi there! I'm trying to found the best practice to implement a main VPN IPSEC server site. And connect several routers as client to this main site. I successfully test a site to site VPN IPSEC using the tunnel concept. But now I want to connect sever...

francisco.trigo · 12-08-2016

Hi all! the ISR 2801 support or not support LMR services? I need to add a PDVM module and more ram to make it work? Here said that is supported....?¿ http://www.cisco.com/c/en/us/support/routers/2801-integrated-services-router-isr/model.html Best R...

francisco.trigo · 06-20-2017

Hi Leo, thank you for your asking. I'm dialing 8 phone number from the FXS port to the PBX and from it to the trunk FXO. dial-peer voice 21 and 22 are those used for FXO outgoing calldial peer 2 is the outgoing from the phones from the FXS match rule...

francisco.trigo · 06-13-2017

Hi Dennis! I will perform that tasks! Best Regards

francisco.trigo · 02-06-2017

Hi Andy! Are you using loopback int for this? I'm using only Vif1 with a /30 mask, you set this like it? peer to peer gre mode in the same lan works, in internet do not but the tunnels are up and ping including the remotes vif1. I'm a little bit lost...

francisco.trigo · 01-26-2017

I installed several LMR solutions with several routers models with great results. Some new IP LMR radio devices do not have the audio codecs complexity that an old router from cisco always had. I always use it in a private wan so I never use VPN conn...

francisco.trigo · 01-25-2017

I'm missing something in the igmp config. So I decide first test the join mechanism of the multicast group without any tunnel or vpn. Setting sparse-dense-mode and OSPF the multicast works great and the solution come up. Changing to sparse mode and ...

Member Since	‎12-08-2016 05:14 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	18

User Statistics

User Activity

Using cisco isr as FXO gateway and FXS subscriber - Dial pattern bes practices -

Sip security in a WAN (internet) ISR used for SIP gateway & Internet access

main IPSEC vpn sever and several remote clients

LMR support into Cisco 2801 Router

Hi Leo, thank you for your

Hi Dennis!

Hi Andy!

I installed several LMR

I'm missing something in the