hi...we have CUCM v14, it's integrated with the Active Directory to sync the telephone directory.we noticed that, the CUCM pull all users from the AD, but we need to pull the users who have the telephone number only.we configured a custom filter in t...
Hello Experts...i have a problem when using ACS 5.1 with AP1141 through EAP-TLS authentication method.when i try to connect my laptop , it's authenticated sucessfully , but when i try to authenticate third party Black Box using EAP-TLS , i have an au...
Hello every body...I have ISE appliance integrated with Active Directory to authenticate the users , and i have WLC integrated with the ISE also.the integration done successfully , and now any user want to access the network through the WIFI ( Dot1x)...
Hello Expertsi have ISE with advanced license for 1500 user , and i have WLC 2504 , and i need to integrate the WLC with the ISE to get ISE features for the Wireless users like posturing , remediation and the authentication as well .my question : is...
hi expertsi have WLC 2504 , and i have LAP1141N , i need to put the AP in remote branch , and it should registered to the 2504 WLC at H.Q over WAN .is it work , and is there any special configurations needed to get this work ...regards
could you please advise what this filter for:(&(&(objectCategory=user)(objectClass=user)(!telephoneNumber=\20)(&(objectClass=user)(telephoneNumber=*))))
hello Experts...i'm facing a similar problem with our ISE.i use the ISE to authenticate Wireless Users and VPN Users.when i enable the ( Change password on next login ) for WIFI users , the pop up screen shows to the user to enter new Password and e...
hello,,,i do confirm that , the 3rd Party already trust the AAA CA , and the AAA trust the 3rd Party CA.when i use Cisco 4.1 Radius , the client is connected without any problem.to clarify the status , this client accept only eap-tls authentication m...
thank you Saldohi install wireshark to get the authentications logs , and i compare this log with working ACS....the only difference is EAP-TLS Flag: 0x00 ,0... ... = length include false , while its true at the working one.any recommendation Reyad