Dears , we have CUCM 11.5 and now we are for first time implementing a SIP trunk with the PSTN to replace the PRIs.all incoming and outgoing calls are fine , but we have an issue as we have as a test 10 DN from the PSTN started with Pilot 9900 , 9901...
Dear ALl ,
i am asking if there is a service or somthing make me detect the employee's attendance ,
note : some employees have DX80 .
is there any kind of configuration , service , application , i can use to detect if the attendance of the em...
Dear All ,
We have a Meeting Room wich is 13 X 7 Meter , so i am asking about the best bractice to where should i mount the ceiling mic from the Video screen ?
i know it should be 2.15 M from the Floor , but where should it be from the Video Scree...
Dear All i have Cisco Jabber Guest server , and need to modify the Webpage ( Calling Web Page ) , like adding my company's logo instead of cisco Logo ! any help !
Dear All , i have cucm 10.5 which has ICT trunk with other company CUCM 10.5 too ,we have site code 66.XXXX on each site and All calls to and from is working fine , Except when the SNR working . when ipphone from Company A , called IPphone in Company...
thanks Jaime , the call flow is , call from mobile (9901) --> PSTN --> PSTN cube --> SIP trunk --> our CUCM --> Phone the call ring on (9900) i can only support the CUCM logs ( Attached )
Thanks you Acevirgil for your interest ,
this is the part Number for the Ceiling Mic CTS-MIC-CLNG , by searching it i didn't found the best practise for how far should be this celing mic from the Speaker Traker ?
Thanks ,
I have only one Ceiling Mic ,
so i have to put it in range 9 Meter from the speaaker trake !
also i need to ask you about the range of this ceiling mic
Thsnk you
Thanks , but i didn't found any info about the Ceiling mic in this doc .
i was asking about where should i put the ceiling mic far from the Speaker track it self .