About Sgj

Sgj · 05-12-2022

Hi... Wanna ask 2 questions.1) What types of Routers and VGs can be configured for CME?And its compatibility with various types of IP Phones? 2) Is it possible to configure CME in Router/VG without CME License?If possible, what type? Thanks in advan...

Sgj · 03-20-2022

Hi, I always configure the Voice Gateway for Fax with:,voice service voip fax protocol t38 nse version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw But I have a new issue, the Fax doesn't work with the T.38 configuration.From the...

Sgj · 02-24-2022

Hi, I see very high utilization at random times. XX-DS17-1#show loggingSyslog logging: enabled (0 messages dropped, 0 messages rate-limited, 12248 flushes, 0 overruns, xml disabled, filtering disabled)No Active Message Discriminator. No Inactive Mess...

Sgj · 01-24-2022

Hi, I have a problem with the UCCX Historical report. I tried a test call until the phone was not picked up by the agent and turned off by itself.But when I check in CUIC, calls don't go to abandoned calls and are read as handled calls. I've also tes...

Sgj · 12-15-2021

Hi, Does anyone know why when I open the 'Abandoned Call Detail Activity Report' no data shows up? Thanks in advanced.

Sgj · 02-25-2022

So what about:- PID 392?- PID 10? Log Buffer (4096 bytes):on(Total/Intr) 65%/0%.Feb 15 02:06:25.785: %SYS-5-CONFIG_I: Configured from console by xxx on vty0 (10.1.160.142)Feb 15 05:28:57.375: %SYS-1-CPURISINGTHRESHOLD: Threshold: Total CPU Utilizatio...

Sgj · 02-24-2022

PID 138 is SSH.Is there a link that points to your statement?I have never used this IOS version before. I recommend to upgrade to 15.0(2)SE11.I've tried to compare with other devices with the same model and version, but no problem.

Sgj · 02-24-2022

XX-DS17-1#show versionCisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 15.0(2)SE6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2014 by Cisco Systems, Inc.Compiled Wed 09-Apr-14 03:37 b...

Sgj · 10-18-2021

Thank you for the reply I think the CSS and Partition are already correct and match.Here are some of the call flows I did for testing:1) 0878XXXXXXXX (caller from outside) > 0361XXXXXX (organization number) > 44000 (IVR number) > press 2 > forward to...

Sgj · 10-17-2021

I already solved the warning of the AXL service issue with "Upload CUCM tomcat trust certs to UCCX and vice versa, and restart the tomcat services on both CUCM and UCCX".But the call still didn't forward to other sites CUCM from outside when the call...

Member Since	‎04-16-2020 05:25 AM
Date Last Visited	‎07-06-2022 12:07 AM
Posts	83
Total Helpful Votes Received	80

User Statistics

User Activity

CME compatibility with the type of Router/VG and IP Phone.

T.30 fax protocol configuration

High CPU utilization on 3750

No abandoned call data

'Abandoned Call Detail Activity Report' no data shows up

Re: High CPU utilization on 3750

Re: High CPU utilization on 3750

Re: High CPU utilization on 3750

Re: No waiting tone on the line through IVR/UCCX

Re: No waiting tone on the line through IVR/UCCX