About pknoops

pknoops · 07-19-2011

Hi,We are currently beginning to roll out an ASA SSLVPN solution whereby we are using split tunnel. The issue we are now finding out is that our internal developers and qa teams have things like test.joe.com and dev.joe.com that do not resolve proper...

pknoops · 08-27-2009

Ideally for redundancy you would need to connect the servers to an another switch and then the 2 redundant css boxes into the same switch. The code you are running is old and you would want to run the latest 8.20 code on CCO.http://www.cisco.com/koba...

pknoops · 04-02-2008

This error means that the chunk was saved to some sig block but can not be read from it. It could be because something happened to the cache, for example sig blocks wereoverwritten (FIFO). If the aggregation errors are few or occasional, theseerrors ...

pknoops · 03-11-2008

Hi,The message you mentioned is an indication that the APP session running on the CSS willconnect to the remote peer running app in 10 seconds. This is just an indication and this message is normal. To avoid seeing this message, you need to reduce th...

pknoops · 03-01-2008

Rafal,Let me see if I can comment by number here. First off, all of your comments on #1 are correct with the exception of mentioning the root CE. In straight transparent caching where you have a router and CE at a branch location running wccp, you do...

pknoops · 02-29-2008

The only other thing I would recommend is connecting a keyboard and monitor to the device and see if anything comes up there. Part of the boot process of the WAE occurs first in the keyboard and monitor (like a PC) prior to moving to the console itse...

Member Since	‎02-24-2002 07:44 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	192
Total Helpful Votes Received	88

User Statistics

User Activity

SSLVPN and split tunnel dns issues

Re: css redundancy

Re: WAAS - Error Message "Aggregation error" Showing up in SYSLO

Re: APP-6: Waiting 10 seconds to connect to peer.

Re: ACNS design/setup

Re: WAE box will not boot