We are using 4507 L3 switch.4 Vlans are there.CPU utilization is 65% for 700 uers.From each vlan we are getting frequent disconnections when connect to another Vlan.but there is no drop while pinging to the gateway.I hereby attach the Sh process CPU....
In our office set up we had configured the ATM link towards the AT&T MPLS cloud,All the links are up but we cant ping the PE device ip.What will be the problem.
Can anyone let me know how to configure the management port present in SupV.The interface does not seem to exisit when i do a show run.is there any cisco doc to which someone can point me toothanks
Joseph/SujiI need to configure the QOS at my router to priortise the bandwidth 0f 256k to one o the destination citrix server.Provide me exact configuration to configure on my router.As this is effectig my production,i need a fast response.Thanks in ...
its for outtbound which means you Dial no start with 21 after that any digits.refer this link more details "http://cisco-elearning-sjdc.digisle.net/cmn/pec/cim/voip_v2r4/content/linked/dpmatch.htm"
