About gilbertthor

gilbertthor · 06-30-2019

Hi, I already a end point devices which only supported 802.11b which like to join the Wireless with Access Point 1832i, as Cisco recommendation i did turn off the 1 - 11mbit data rate which cause this endpoint devices unable to join the wireless netw...

gilbertthor · 04-21-2009

Hi, i created a ipsec tunnel but i'm fail to connect to the Peer side, i enable the debug and found some error but i dunno what is that means? need help!PNG-FW(config)# Apr 21 18:11:31 [IKEv1]: Group = 147.178.7.132, IP = 147.178.7.132, QM FSM error ...

gilbertthor · 03-11-2009

Hi,Cisco 3600 router is it can support Cisco Unified Communication Manager ?I have the module which is Voice 2V, Is it can use it ?Thks -Gilbert

gilbertthor · 11-20-2008

Hi,I have a question on how we use LMS3.0 to push the configuration to new switches?may i know the guide line for it, urgent!Thank a lot -Gilbert

gilbertthor · 11-06-2008

Hi,At first i install the LMS 3.0 with the evaluation license. After that we succesful register the license and got the activation key from cisco,but while trying to update this new activation key into my LMS server it prompt me the error "Could not ...

gilbertthor · 07-01-2019

Hi Leo, Yes that is a medical devices end point. i did brought the devices and tested in my lab test wlc controller with 1042N access point with only turn mandatory on 11mbps data rate and it was working fine. i saw the end points connected as 802.11...

gilbertthor · 03-13-2009

Hi,If i wanna use the Cisco 3600 as the cisco unified communication manager is it i need to add in additional card, from the documentation i saw that we need the voice nm card.Is it correct?-Gilbert

gilbertthor · 03-12-2009

Hi,Thks alot!Will try it out.-Gilbert

gilbertthor · 03-12-2009

Hi java,Thks,Anyway what is the function for Voice 2V, which i have together with the 3600 router ?if i download the cucme, then is it any extra module i need on it ?Thks -Gilbert

gilbertthor · 03-12-2009

Hi Java, Thks a lot, another help is it can send me the link for what requirement for me to set up the Cisco Voice environment. So i can get the more clearance picture on it.Thks -Gilbert

Member Since	‎08-14-2006 02:26 AM
Date Last Visited	‎07-08-2019 06:29 AM
Posts	65

User Statistics

User Activity

802.11b endpoint to join Cisco AP 1832i

VPN Error message

Cisco 3600 router is it can support Cisco Unified Communication Manager ?

LMS3.0 how to push the configuration to the new switches

LMS 3.0 register appear Error

Re: 802.11b endpoint to join Cisco AP 1832i

Re: Cisco 3600 router is it can support Cisco Unified Communicat

Re: Cisco 3600 router is it can support Cisco Unified Communicat

Re: Cisco 3600 router is it can support Cisco Unified Communicat

Re: Cisco 3600 router is it can support Cisco Unified Communicat