About steven-dunn

steven-dunn · 06-06-2002

In a data centre which uses VTP trunks to connect user VLANS to the same core switches that connect server and network VLANs, if a switch is added to suppliment a user VLAN it will affect a trunk and hence spanning tree will run on all VLANS. Can I e...

steven-dunn · 06-04-2002

In a data centre which uses VTP trunks to connect user VLANS to the same core switches that connect server and network VLANs, if a switch is added to suppliment a user VLAN it will affect a trunk and hence spanning tree will run on all VLANS. Can I e...

steven-dunn · 01-12-2009

Most of the problems i had were browser issues. Unable to resize windows in a browser throguh RDP.But im a CLI fan. Steve

steven-dunn · 01-12-2009

what is/are the problems ?

steven-dunn · 12-02-2008

may have something to do with the process sequence. The ingress and egress process sequences are different. I think outbound is route then nat, inbound is nat then route.Steve

steven-dunn · 12-02-2008

The WAE can reside on either a dedicated subnet (where redirection is not enabled) or on the subnet that has redirection enabled.If it is on the same subnet that already has redirection enabled, you will need to use GRE return to a loopback on the 45...

steven-dunn · 12-02-2008

Sounds like the CM has overwriten the static IP address.It's probably best to boot it with DHCP, then change it to static, then register it with CMS.From here you'll probably have to deregister the WAE from the CM, set it's IP address to static, then...

Member Since	‎06-02-2002 11:11 PM
Date Last Visited	‎02-24-2021 11:45 PM
Posts	104
Total Helpful Votes Received	8

User Statistics

User Activity

STP bites !

At the mercy of STP !

Re: Is anyone using ANM?

Re: WAAS 4.1.1.c problems

Re: ip nat outside destination

Re: WAAS Topology questions

Re: WAAS IP address problems