About sketterman

sketterman · 02-20-2012

I am shaping my outbound router (2921) link to 50Mbs. I have my QOS policy nested inside my shaping policy and I have noticed (what I think) is a high amount of packet drops in one of my queues.Below is the output of 2 show policy-map interface g0/0...

sketterman · 10-22-2011

I have a 3750 acting as my WAN router connected to our MPLS provider via ethernet. For a couple days my inbound bandwidth has been completely saturated at 20Mbs (the speed of my link). I know this model of switch does not support netflow, but is th...

sketterman · 09-22-2011

I have our CUCM (6.1) server connected to our VCS 6.x implementation trough a sip trunk. I can dial any VCS registered end point from devices registered to CUCM and vice versa. I have a DID configured to route our MCU 4510 that is registered to VCS...

sketterman · 09-06-2011

I just installed viewmail 8.6.4 in Outlook 2010, using Unity 7.x on the backend. Everything is working OK, but i noticed that there is no distinguishing icon for voicemails messages anymore. There is just an envelope that looks like every other ema...

sketterman · 08-22-2011

I have CUCIMOC up and working fairly well. When using the deskphone I can drag contacts from lync to place calls both onnet and offnet, click to dial works as well as calling onnet and offnet from the dialpad.But if I switch to softphone mode I only...

sketterman · 04-27-2012

How are you calling the numbers from the C20? are you dialing @IP_OF_CUCM

sketterman · 04-27-2012

My issue was a little different as my SIP ISP requires a known caller ID from the calling party, so my call was making it to the gateway but the ISP was throwing the 404.If you want to change the caller ID, I did a transform on my gateway to add a de...

sketterman · 04-27-2012

Have you done a debug on the cucm to see how cucm sees the call and tries to route it?Sent from Cisco Technical Support iPhone App

sketterman · 02-21-2012

I am putting the majority of my business WAN traffic in AF21 and setting my internet and a few bandwidth hogging servers in class-default. I increased my queue-limit on my AF21 class to 256 and I have already lost 2715 packets in 15 minutes.I guess ...

sketterman · 09-30-2011

Turned out to be a callerid issue. The calling number field was empty when it hit the gateway. I created a translation profile to add a default number for null calling party fields on the gateway, calls work nowSent from Cisco Technical Support iPh...

Member Since	‎04-10-2002 03:38 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	71
Total Helpful Votes Received	8

User Statistics

User Activity

Traffic shaping - excessive drops?

Monitor WAN traffic 3750

VCS to CUCM calling outbound to the PSTN

Viewmail and outlook 2010 - no icon?

CUCIMOC Softphone - offnet calls

VCS to CUCM calling outbound to the PSTN

VCS to CUCM calling outbound to the PSTN

Re: VCS to CUCM calling outbound to the PSTN

Re: Traffic shaping - excessive drops?

Re: VCS to CUCM calling outbound to the PSTN