Putting together a Cisco A-FLEX-3 Named User estimate for a premise CUCM system. Will include a VG400-2FXS/2FXO gateway. What FLEX licenses, if any, are needed to enable the FXO ports and the FXS ports?
My customer has several Cisco SDWAN (Viptela) sites that consist of a single vEdge/cEdge router and a single layer 2 switch. A single service side vEdge/cEdge port is connected to the switch and is in VPN1. These sites are in locations that are share...
My customer is trying to connect 2 C9500-24Y4C switches together via one of the 100G ports. They are using a 3rd party version of this cable/QSFP --> QSFP-H40G-CU1M cable. Neither switch acknowledges that anything is connected to the port (see below...
I don't think either of these responses would work for our problem. We need to lock down the port on the vEdge/cEdge router, not the port on the switch. Also, it looks like SDWAN port security is not supported in the vEdge routers or the ISR1100 cEdg...
