D_W
Level 1
Level 1
Member since ‎03-31-2021
‎04-17-2024

User Statistics

  • 57 Posts
  • 0 Solutions
  • 3 Helpful votes Given
  • 6 Helpful votes Received
Recent Badges
1 Helpful Vote
20 Replies
10 Replies
5 Replies
FirstQuestion

User Activity

1) vlan20 经 HKBN网关出口 策略路由                 2) 其他vlan 经 HKGC网关出口 默认路由指向HKGC 
引用命令不知道是那里問題?g_core(config)#ip access-list extended hkbng_core(config-ext-nacl)#10 permit ip 10.105.20.13 0.0.0.0% Incomplete command.g_core(config-ext-nacl)#10 permit ip 10.105.20.13 0.0.0.0 anyg_core(config-ext-nacl)#exitg_core(config)#route-map hk...
ip route 0.0.0.0 0.0.0.0 192.168.1.254       ( 第一互聅网关)ip route 0.0.0.0 0.0.0.0 192.168.2.254 2    ( 第二互聅网关)ip route 10.106.20.0 255.255.255.0 192.168.1.254ip route 10.107.20.0 255.255.255.0 192.168.2.254
插上第一組的专线到( 二层交換机 -- 网关 )可以正常使用 .插上第二組的专线到  ( 二层交換机 -- 网关)交換机所有端口全部长亮綠灯, 交換机自动重起,不知道是什么情況?接口设了 (speed 100 ) 速率也不成. interface Gi1/0/1description "SDWAN"switchport access vlan 400exit!interface Gi1/0/2description "SDWAN"switchport access vlan 400exit!in...
R1(config-if)#ip add 192.168.1.10 255.255.255.0R1(config-if)#no shutdownR1(config-if)#vrrp 1 ip 192.168.1.100                     ^%Invalid input detected at '^' marker,
Community Statistics
Member Since ‎03-31-2021 11:46 PM
Date Last Visited ‎04-17-2024 12:04 AM
Posts 57
Total Helpful Votes Received 6
Helpful Votes From
Helpful Votes Given To