About Sergey Fer

Sergey Fer · 06-06-2012

As I know, they will work. But Cisco does not support such configuration as a stable, and says that it was tested for a 30 minutes long. You may find a procedure description in Upgrade Guide here http://www.cisco.com/en/US/partner/docs/switches/datac...

Sergey Fer · 05-30-2012

What speed does your Tandberg negotiate in VC? Consider that LLQ (priority queue) is policed and all traffic that exceeds 1024 kbps is to be dropped. I'm not sure that IP SLA will help you here.Another thing to consider is an overall delay, jitter an...

Sergey Fer · 05-30-2012

You need something like this (I did only basic configs)ip access-list extended HTTP permit tcp any any eq 80route-map PBR permit 10 match ip access-group name HTTP set ip next-hop route-map PBR permit 20interface ip policy route-map ...

Sergey Fer · 05-30-2012

It's a good chance to study something new OER is a rather complex technology and is not too fast. If you need a solution that reacts to changes in a few seconds, probably better to start from scripting. It is more simple. Don't dig into TCL scriptin...

Sergey Fer · 05-29-2012

Yes, I agree with Joseph - it is really unexpected. May be IOS update will help?..

Member Since	‎04-20-2005 02:53 AM
Date Last Visited	‎11-01-2017 02:34 AM
Posts	119
Total Helpful Votes Received	57

User Statistics

User Activity

Re: Fabric-1 and Fabric-2 Interoperability

QOS Help needed - Tandberg VC dropouts between sites

use policy based routing to redirect http traffic

Change upstream provider without losing BGP connection

Nest QoS with shaping - getting drops