Hello friends! I am kicking myself because I cann't find the route of my problem so hopefully somebody can! I have two Cisco 1510 Mesh Access points one is the root. I am working with a Motorola VC70 Windows CE 7.0 unit. The pr...
Hi Everyone, I'm hoping that you guys and gals can help me with an ongoing problem that we have at one of our sites. We're working on areas of the location due to it's size and phone load. We have an area, that I will refer to as building A, that...
Hi Everyone. I had a quick question regarding using a 1252 Access Point with a power injector but only on a 10/100 port. I saw that Cisco and Intel have a nice white paper that shows actual throughput benchmarks with 802.11n clients in different spot...
Hi Everyone, I just wanted to know if anyone has worked with the LiteShow II adapter and LWAPP ap's. I have a problem where I set up a WPA-PSK network and the device fails to connect. The client status said that it failed the authentication polic...
Hello Everyone. I am trying to deploy a guest wireless network. I created the "guest" SSID and it is set to open authentication with the web authentication option. Once a user associates to guest, they get a DHCP address from an ISA 2004 server that ...
I think we may have found the solution for this. Apple said that in IOS 11 they stopped supporting SHA-1 certs for TLS connections. I realized that our captive portal uses that cert! I generated another local cert using SHA-2 512 and clients where...
We do use a DHCP server that is Windows 2008 R2. I will have to test configuring a static IP. What happens is that it will connect, grab a IP and then disconnect after 3 seconds.
When I do a debug on the client and when the unit roams from the working AP to the Mesh the debug stops ( I am doing this from a 2106 Controller). But when the Client roams back to the working AP it shows this. Which I assume is a successful roam....
