About dimigav1977

dimigav1977 · 09-08-2021

I have registered an single number on service provider.I have the following configuration on an C2901 router with 4 fsx ports and uck9 license installed. On the fxs0/1/0 and fxs0/1/1 ports of the router are plugged analog phone devices. I also have a...

dimigav1977 · 09-06-2021

Hello, Can we configure on a router port two connection methods?For example on gi0/0.835 IPCP dialer connection and on gi0/0.837 dhcp client?

dimigav1977 · 08-31-2021

Dear all, I have a problem with DHCP. My router act as DHCP Client and Server together.The Gi0/0.837 WAN connection configured as DHCP Client to obtain IP from ISP.The Gi0/1.2 Data Network with IP scope 192.168.2.0/24 and Gi0/1.100 Voice Network with...

dimigav1977 · 08-26-2021

What is the difference between the following?The first copied from cisco with unsuccessful registration and the second from an unknown device which is successfully registered. REGISTER sip:ngn.hol.net:5060 SIP/2.0Via: SIP/2.0/UDP 10.220.44.141:5060;b...

dimigav1977 · 08-25-2021

Dears, Can we configure a cisco router with FXS ports to act as ATA device? Thanks

dimigav1977 · 09-07-2021

Dear Mr. Larosa,as I replied in the previous thread I tried to make the following interconnection without success.WAN->SW Gi0/1(trunk)SW Gi0/2->R Gi0/0 (subif 835)SW Gi0/3->R Gi0/1(subif 835)I posted also the configuration files.So, now with the atta...

dimigav1977 · 09-06-2021

I get IP only on 835 subif. The second subinterface never obtain IP.If I configure the router only on 837 subinterface I get IP from DHCP.I will prepare two configurations (one with subinterface 837 only and one with both 835 and 837) and I'll post t...

dimigav1977 · 09-06-2021

The router is connected to ISP ONT device. The services are data and voip. The subinterfaces are 835 for data and 837 for voip.The connection type for data-835 is pppoe and for voip-837 is dhcp.Also uses 802.1P priorities. For data-835 priority is 0 ...

dimigav1977 · 09-04-2021

Dear Giuseppe, I tried the following config on Cisco switch and then on the router.Router has never been able to connect to any connection (Dialer or DHCP).Maybe there is a mistake on switch config. My physical connections are the followings:ISP -> S...

dimigav1977 · 09-04-2021

Dear Mr Driver,Firstly I would like to thank you for all your replies. As you can see in the "Working ISP.png" file the ISP from one physical WAN port opens three possible connections together in different VLAN IDs with different connection methods.I...

Member Since	‎07-28-2021 05:55 AM
Date Last Visited	‎06-22-2022 12:08 AM
Posts	41
Total Helpful Votes Received	45

User Statistics

User Activity

dial peers help

Multiple connection methods in single router port

DHCP Problem

SIP Traces Differencies

ISR Router & ATA

Re: Multiple connection methods in single router port

Re: Multiple connection methods in single router port

Re: Multiple connection methods in single router port

Re: DHCP Problem

Re: DHCP Problem