Hi team,
Please tell me how to make a Cisco ASA remote access vpn so that the user connects with a static IP address and how difficult it is to do in general?
Hi Team,
Does anyone know how to correctly fix static IP by user on Cisco ASA Remote access VPN? To always give the same IP to the user when connecting?
Hi Team,
Maybe someone saw the problem in themselves. With WPAD on Windows disabled on the Cisco secure client version 5.1.0.136 do not work. With WPAD disabled on 5.0.02075, 4.7 and 4.6 everything works fine. Why so? Maybe someone knows
Hi team, maybe who help me)
I have ASA 5525. I want to write in the event manager if the ping is not successful (Success rate is 0 percent), then you need to execute clear crypto ikev2 sa "x.x.x.x" Check available IP once every 3-5 minutes. Maybe som...
Hi team, After switching to a backup RSP board (on ASR903), using the backup forced switching method, it became impossible to connect to the router via the ssh protocol (telnet worked, ping went through, and all protocols functioned). After returning...
This is not from the fall of the tunnel, but from sticking, and you can check this only by pinging the other side of the tunnel, but this script does not do it either, because it cleans every 60 seconds and does not look at the ID. Perhaps the ID ASA...
It turned out like this for me. If i ping my ip and unsuccessfully i have massadge in my syslog Dec 19 2023 18:01:10: %ASA-2-106016: Deny IP spoof from
My script looks like this:
event manager applet tunnelHealthevent syslog id 106016event timer watc...
