About ahmed_saleh

ahmed_saleh · 01-22-2009

I have call manger V 4.1 and I am administrator for this call manger and I have 2 operators if I nee...

ahmed_saleh · 12-23-2008

ios ver 12.2

ahmed_saleh · 12-23-2008

i forget the password for 500 switchHow I can recover 500 switch passwords

ahmed_saleh · 12-23-2008

1- i rebleaced the gbic same error2- this switch have 4 ports gbic and tray to change from on port i...

ahmed_saleh · 12-23-2008

and i do shut no shut tell now i have the same error

ahmed_saleh · 12-23-2008

i have cisco gbic

ahmed_saleh · 12-23-2008

I have problem with g0/52 in 3560 switch IT_SW1_3560#show interfaces gigabitEthernet 0/52GigabitEthe...

ahmed_saleh · 12-01-2008

Please I am attached the PIC from where I can get this portal in LMS 3.0

ahmed_saleh · 11-28-2008

Ok If I need to see the up & down devices .in DFM just I see the fault devices In old CISCOWORKS LMS...

ahmed_saleh · 11-26-2008

I have LMS 3.0 installed over windows 2003 server to mange 5000 node , I discovery 1300 node and can...

ahmed_saleh · 08-18-2008

I have tow deferent ISPFirst one ISP 1 support us 6mb + 1 range of ip addresses (pool)Second one ISP...

ahmed_saleh · 08-12-2008

1-How I can install Dram and I need the command to show size for ram 2-and I have installed external...

ahmed_saleh · 08-11-2008

please I need response about this configuration just I am use this to share what I will do in the ne...

ahmed_saleh · 08-11-2008

Sorry I am running dynamips to share what I will do this is not a rally configuration ______________...

ahmed_saleh · 08-11-2008

Ok I will drown my network now and I will post it for you again

Date Registered	‎03-09-2008 09:50 AM
Date Last Visited	‎03-14-2021 12:42 PM
Total Messages Posted	80
Total Helpful Votes Received	5

How to close session in call manger V 4.1