The 15454 MSTP Platform will be the replacement product, however as the EOL notice states it is not a direct 1 for 1 replacement. You will need to work with your Cisco sales team to review your transport requirements and they will be able to provide...
Steve,The 15454 can provide a BITS-OUT to the 15310 via the BITS-OUT wire-wrap pins on the back of the15454 Chassis.The 15310 CL has an RJ-45 connector for the BITS Input with Pin 6 (-) and Pin 3 (+). Here is a link to the user documentation that co...
Mike,It sounds like the splices have introduced additional loss into the fiber, and may need to be redone. Check the Receive power levels on your problem SFPs and then compare it to the minimum Receive Sensitivity for that SFP. If your power coming...
Where are you seeing the VLAN mismatch error? If you have both the 2950 and the core switch setup as an access port, I wouldn't expect to see that. Try removing the VLAN 2 statment from the Core Switch to see if this clears the problem.
Jeremy,The traffic egressing the 2950 DCN port (23 or 24) is untagged because these ports are setup as Access Ports. So you would need to configure your core device as an Access port also, then add whatever management VLAN you want to use to it (VLA...