About Shaikh Aman Uddin

Shaikh Aman Uddin · 07-22-2012

Hi,kindly check the below config, which i did on cisco 2960S switch at user ingress interface. but the marking is not showing in show policy-map interface gig 1/0/10 interface and ACL is not showing any match. I also had a config reference from 2960S...

Shaikh Aman Uddin · 04-04-2012

Hi,I have a UCS Server C200 M2 Rack Mount and planning to install Windows 2008 R2 server in it. To make it High Available, i m configuring RAID 1 in it. I can easily configure RAID from BIOS setup and after rebooting it shows me that the RAID 1 is fo...

Shaikh Aman Uddin · 04-02-2012

Hi,I am using ftp server over internet, for this I am able to connect with ftp server successfully but unable to transfer data. I am unable to see the file's list on connected ftp server. I am using the router Cisco 1941 with 15.0 (1r) M12. There is ...

Shaikh Aman Uddin · 03-08-2012

Hi,Can you please share that till how many days, ACS server ver 4.2 saves logs in local machine by default?Thanks,

Shaikh Aman Uddin · 02-14-2012

Hi,How many types of signatures need to be enable while IDSM-2 deploying in Data Center behind FWSM?Thanks

Shaikh Aman Uddin · 04-04-2012

Dear Friend, There is no metter to believe, as i attached here the screen shots for your review, Well the SW RAID is selected and the steps are performed accordingly but the issue is there. We have multiple times checked it and we also upgrade and d...

Shaikh Aman Uddin · 04-03-2012

Hi Neeraj,Thank you for your response, I will check your recommend action on device and will let you know about it. Further, I will aslo send you the configuration and sh translation output.Thanks !

Shaikh Aman Uddin · 02-16-2012

Hi Bob,Thanks for your response,Its mean you suggest to install IDSM-2 in promiscuous mode with updated signatures? or you have some other design for IDSM-2 deployment?Kindly adviseThanks in advance!

Shaikh Aman Uddin · 02-15-2012

Thank you for your response!!!We are planning to deploy IDSM-2 at client site. Customer is asking few things:1. If we install it in promiscuous mode then what will be the best utilization and design for this module, how to configure it2. If we in...

Shaikh Aman Uddin · 02-14-2012

Ok, thank you for your response, if suppose false positive sig is start trggering then how we can configure the device to make is true positive?

Member Since	‎10-15-2009 02:49 AM
Date Last Visited	‎03-31-2021 12:35 AM
Posts	78

User Statistics

User Activity

dscp marking in Cisco 2960S -- 12.2 (55)SE3

RAID 1 is not showing in UCS Server configuration utility

enable passive ftp on IOS 15.0 version

Default log time

IDSM-2 best practices

RAID 1 is not showing in UCS Server configuration utility

enable passive ftp on IOS 15.0 version

IDSM-2 best practices

IDSM-2 best practices

IDSM-2 best practices