Hi Leonardo,You can use a localized control policy to limit the prefixes when redistributing.let's say you want to advertise only the 2.2.0.0/16 prefix into BGP1. Create a prefix-list(config)# policy lists prefix-list prefix22 ip-prefix 2.2.0.0/16 le...

Thanks Colby. Your site is one of those hidden gems. Just bought your ebook. You should do a full course on visio network diagrams..

Confirm that your inside interface is assigned to vlan 1    interface Ethernet0/1switchport access vlan 1   Also confirm you have a static route to your inside subnets.   route inside 10.0.0.1 255.255.255.0   PS:- word to the wise DO NOT post your co...

Hi, Are you connecting at 9600 or 115200? Follow the rommon procedure. Hold the mode button down when powering on the switch for 15 secs. Connect via console to the switch using 9600 baud rate if you see jibberish try reconnecting using 115200 baud r...