About diro

diro · 10-12-2007

all ip adresses you configure on the ace are not distributed in routing. So if you have an ip addres...

diro · 10-10-2007

You have a vlan on the supervisor in between your msfc and ace. If the msfc does routing for that vl...

diro · 10-10-2007

this link will help youhttp://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_...

diro · 10-08-2007

Looks OK, but why the msfc on the server side since your using the ace as dg?

diro · 10-08-2007

found a way myself"disconnect ?"

diro · 10-08-2007

What is the maximum amount of telnet users on the css, and how can i see the connected sessions. Thx...

diro · 10-05-2007

Yes vip and real servers can be on the same subnet . What you then should use is bridge mode and use...

diro · 10-04-2007

you can copy your tftp config to the startup config, and then copy your startup to your running.

diro · 10-04-2007

A css can has 2 bays which can be either filled with a harddisk or a flashdisk. These bays can be se...

diro · 10-04-2007

yes you can turn them offjust type in "expert" in the user exec modeforget about pasting use tftp/ft...

diro · 10-04-2007

Remove the ip address of the circuit and the circuit will disappear automaticallyno ip address X.X.X...

diro · 09-26-2007

I have the same problem, most documentation say that they do not have to be the same but some docume...

diro · 09-26-2007

ip dhcp pool network default-router dns-server

diro · 09-25-2007

These should work:http://www.cisco.com/en/US/products/hw/contnetw/ps792/tsd_products_support_series_...

diro · 09-24-2007

If you do not need to loadbalance i would suggest to do a vserver with one serverfarm that has one s...

Date Registered	‎09-30-2005 06:40 AM
Date Last Visited	‎08-18-2017 03:54 AM
Total Messages Posted	155
Total Helpful Votes Received	156

Re: ACE - POC