dathaide

hiWhat will my variance be in this case. I set it to 2 but don't eigrp load balancing across unequal...

i have a PRI connected to a PBX and noticed the slip secs increasing i have already tried changing t...

You need the isdn protocol-emulate networkcommand on your serial 0/0:23thanks

hiI have a PRI from a 7206 to a Definity G3R. Doing a show isdn status and a debug isdn q921 shows a...

hiIf i have a gatekeeper and a gateway router at Site A and in the event of a failure of the PBX or ...

You don't need a gatekeeper although implementing one provides a very scalable solution for voice ov...

Does cisco make a Windows based version of the syslog server. If so where can i download it?thanks

hiI am trying the similar solution. If i was to implement a PRI instead of a T1 what NM-HDV module w...

thank you for your answerSo to conclude in the case of fast switching and using the variance like yo...

I have a follow up questionEIGRP provides unequal load balancing with the use of the variance comman...

hiI am working on connecting a 3745 gateway router to the PBX to do Voip for 10 new locations. What ...

thanks for all your replies. Since they are unequal i am planning on using the variance command. do ...

hiI have two routers at Site A. One connection is sat 128K and the second is 56K sat conneciotn to s...

Tried it does the exact same thingthanks