dathaide

hi I have a remote with two satellite link back to corparate. I am using ip cef with per packet. I a...

Thanks mark I will try this solution however its going to be next week sometime as i am waiting for ...

hiI have a remote site with two serial interfaces back to corporate. I need to setup a backup dialer...

hiI have two links from a remote site to corporate. I want Voip to travel on one link and am using a...

I will be implementing somewhat of the same configuration as Manoj. Remote site with two links one 1...

hiWe have a 64k circuit from remote to corporate. What are the benefits of using point to point fram...

Such as Encapsulation. What about efficieny?

To run VoIP. A frame relay circuit which is point to point or a point to point. thanks

hi Thanks all for your help I too though the same and disable cef and had the very same problem. Wha...

hiYour provider will let you know what DSO to expect the circuit. For example if you have a circuit ...

hiI have a remote site with a 2651XM and a 2950xl switch . The site has two 64K satellite uplinks to...

hithanks do u have a link to a sample config

this is the way i would do it. Use a private class address for your host and severs. I assume you ha...

See if this helps u.http://www.cisco.com/en/US/partner/products/hw/switches/ps700/products_tech_note...

hiI have also configured the router without the ACL for Static NAT assignments and works well just a...