Hello everyone Please i need help with this qos configuration Users report latency on the network The switch has already been checked (cpu, memory, logs) Thanks a lot mls qos map cos-dscp 0 8 16 24 32 46 48 56mls qos srr-queue input bandwidth 90 10m...
Hi everyone Please I need help on how to change the event manager applet name without delete all actions configured Actually: event manager applet NAME_A Change to: event manager applet NAME_B Thanks a lot
Hello Everyone I need your help What is the command to validate Ethernet1/36 Lane 1 Transceiver Transmit and receive Power Sensor Our monitoring system is detecting alarms about that Thanks very much
Hello Everyone I need your help What is the command to validate subslot 0/1 transceiver 3 Rx and TX Power Sensor Our monitoring system is detecting alarms about that Thanks very much
Hello my friends I need your help We have configured Redistribution static with Route Maps <ACL> Why is advertise this hosts and subnets if the ACLs not match? #sh ip route 172.30.240.70Routing entry for 172.30.240.70/32Known via "static", distance 1...
01#show interfaces diagnostics optics ?% Unrecognized command I try this: 01#show hw-module subslot 0/1 transceiver 3 statusThe transceiver in slot 0 subslot 1 port 3has been disabled because:the port is in shutdown stateModule temperature = +24.878...
Hi The question is: Why is advertise this hosts 172.30.240.70/32 if the ACLs of the route map Permit_to_Redistribute not match? So are both from the same device or are they from different devices? Same device The only route map is Permit_to_Redistrib...
