Hello Maksim,seems there is console opened on that server.like the one you open when you go to my computer ->> right click ->> manage.or when you go to run and type MMC.- make sure that you are not opening any such session , and try the install again...
Hello Pavel,you can use root , non root bridge setup.and on any of them you can add wireless clients supportby command , station role root bridge wireless-clienthere is some configuration commands i used previously on root-nonroot setupROOTAP(config)...
Hello Huw,as i see in your confirguartion.native VLAN is 121. so you have to correct following in your AP configuration1) interface Dot11Radio0.121 encapsulation dot1Q 121 native bridge-group 121 ->>>>>>>>>>>>>>>> change this to brige-group 1...
Hello Unni,for site survey you have to do it with spectrum expert or airmagnat.and recommended to use same antennas in site survey (Same as ones going to be used).this is needed to detrmine best channels to operate and also if there are any possible ...
Hello Unni,you can use point to point bridge link. with high gain antennas to cover this distance.you can use 1310 AP's.and assign them to root and non root.this will result in bridging the two sites A-B....also you can limt which VLAN's pass between...