About dgj1

dgj1 · 06-21-2009

%EARL_L2_ASIC-SW1_SPSTBY-4-DBUS_HDR_ERR: EARL L2 ASIC #0: DbusHdr. Error occurred. Ctrl1 0xB08D0E3DWe recently implemented VSS 1440 on a pair of 6509E chasis's. Burned in for 3 weeks and tested for 3 weeks, no errors were reported. Two days after c...

dgj1 · 03-05-2009

I'm trying to figure out if there are any issues redistributing default route from EIGRP to BGP out a serial interface and then also receiving default route in same serial interface via BGP and redistributing back into EIGRP. Using different metric/A...

dgj1 · 10-06-2008

Can anyone tell me a valid reason why disabling spanning-tree should be considered. Everything I have read cautions against it. Just wondering if there is something I missing.Here is an example of some of the configs I am running into on switches i...

dgj1 · 09-10-2008

The line numbers associated with the access-list that I want to modify are in consecutive order with no gaps. If I enter a line number that already exists to insert a new Access Control Entry, will it overwrite what is already on that line number or...

dgj1 · 08-20-2008

Is it better to have routed interfaces between the two cores (Running EIGRP) or a port channel with No Passive Interface VLAN?

dgj1 · 06-25-2009

Cisco's response is that they were unable to locate a known bug in IOS causing the error and believe the problem may be the chassis. However, they are having us do some diagnostic work first; to ensure no other module is causing the error.

dgj1 · 06-21-2009

The port-channels going to my access switches.I can't post the VSS config, or the output today. I'm suppose to be on vacation, but having trouble getting this off my mind. Although I might be able to pull it out of the sho tech output I posted in my...

dgj1 · 06-21-2009

Did you find a solution?

dgj1 · 06-21-2009

Jimmy,Thanks for your input. Please see my recent response to Reza. Also the response I received from Cisco was: This message indicates that the EARL L2 ASIC detected an invalid header inthe DBUS. This signifies that some malformed packet was receiv...

dgj1 · 06-21-2009

Hi Reza,Yes, we get the same error message when we fail over to the stand-by box. Also another interesting symptom after the supervisor was replaced on switch 1 -everything came back up normally except for two portchannels. Everything was working as...

Member Since	‎02-02-2006 09:42 AM
Date Last Visited	‎04-02-2018 09:05 AM
Posts	35

User Statistics

User Activity

Need help to determine cause of error message?

Questions about Redistribution (EIGRP and BGP)

no spanning-tree vlan

Access List and ASA Version 7.2

Design Question: 2 6509's Collapsed Core/Distribution

Re: Need help to determine cause of error message?

Re: Need help to determine cause of error message?

Re: Configuring a vss switch to 2 3750's stacked

Re: Need help to determine cause of error message?

Re: Need help to determine cause of error message?