I have an issue where there is a CUBE(h323-sip) with a CCM 4.2 cluster setup. In Call Manager h.323 fast start is enabled outbound to the gateway with g729 set as the outbound codec, this was recently changed so that SDP is sent in the initial INVIT...
Is there any "run sql" queries that can be run on CUCM 5.x/6.x/7.x servers to correlate a PKID to a phone/translation pattern/etc description.The reason, I ask is because the "Cisco Role Based security" logs all log a pkid/name. I want to know how to...
I have a Cisco 2821 that is getting two different T1 clocks from different providers. The Cisco 2821 has a VWIC2-2MFT-T1/E1 wic card. 1 t1 on the card is data, 1 is a voice PRI. I am trying to figure out this proper configuration for this, I was th...
It is my understanding that if packets are CEF switched, they will not need to used the public buffer pool on the router, unless the packet is punted. Only fast and process switched packets, is this correct?
Vatter, thanks for posting that bugID. It seems to explain the situation I saw as well.CUCM Software MTPs allows codec pass-through by default (non configurable it appears), so if you have one in an MRGL, it gets used over an IOS MTP that doesn't hav...
Im having a similar problem. CUCM is allocating a MTP for SIP-Notify to RFC2833 conversion. It fails to allocate any MTPs on the IOS gateways (just set to codec g711ulaw) and only allocates CUCM software MTP.I saw on the CUCM that the CUCM software...
ata 186.. Yeah I was think it may be the ATA. The other end of the SIP side is not Cisco, so it will not support the cisco proprietary method of faxing.The whole issue of going to fast start in the first place is so that they could get an earlier me...
