Hi, I am trying to upgrade the ROMON on one of the 6509 redundant device. The current config shows as below
MYDEVICE>sh rom-monitor slot 5 rpRegion F1: APPROVED, preferredRegion F2: INVALIDCurrently running ROMMON from F1 region
MYDEVICE>sh rom-monit...
Is there a way to shut down all the ports at once on a 6509E, 3560X, 3560G, 3750G and 4948E?
We are upgrading the IOS on redundant pair switches and would like to shut all the ports at once - reload the switch- verify the IOS upgrade - No Shut all po...
Can someone help me on whey the below commands doesnt work
xxx#
xxx#del flash:c3560e-universalk9-mz.122-53.SE2
Delete filename [c3560e-universalk9-mz.122-53.SE2]?
Delete flash:c3560e-universalk9-mz.122-53.SE2? [confirm]
%Error deleting flash:c3560e-u...
I am trying to upgrade a C3560X-48T-L to the code - c3560e-universalk9-mz.150-2.SE10a.bin
from current code - c3560e-universalk9-mz.122-55.SE5.bin
What could be the possible issues that I can see during or after the upgrade. Just trying to be cautiou...
Hi, I need your help again - Im new to this hence trying to do my research first and Im unable to find the below for part# ASA5580-20-4GE-K9, can you please help me with that! Thanks again for your time!
1. End of sales date
2. End of Software main...
In other words, will this be the output after upgrade and reload commands?
Region F1:APPROVED Region F2:APPROVED, preferred Currently running ROMMON from F2 region
Thanks for your response Reza,
Yes, I just need to shutdown the uplinks before upgrading, can I shut all the up link interfaces at once is what I would like to know. Individually shutting the links will take lot of time
That is helpful Leo, thanks a lot, unfortunately I cant go with the archive download-sw process as per the standard of procedures, however, the MD5 hash value comparison will help me a lot!
