HemanthKannan
Level 1
Level 1
Member since ‎11-25-2014
‎10-09-2017

User Statistics

  • 15 Posts
  • 0 Solutions
  • 20 Helpful votes Given
  • 4 Helpful votes Received

User Activity

Hi AllI was Trying to Capture Wireshark Logs for an Outbound Call on CUCM CUCM-->H323-->PSTN--CUCM - NO Otubound Fast Start EnabledWhy is connect Message Coming after TCS,MSD and OLC Messages.Please Help me to understand this.
I called 8110 from 8111 and left the voice mail message."MWI" does not turns on 8110However am able to hear the voice mail from 8110 by logging in with the message key   Can somebody please help ..?Below are the details."UL CSS" CONTAINS "IT PT" Phon...
Can somebody Please help*Jan 30 06:22:15.782: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x0, Calling num 49450801*Jan 30 06:22:15.782: ISDN Se0/0/0:15 Q931: Sending SETUP  callref = 0x0095 callID = 0x8016 switch = primary-net5 i...
My Cisco CUCM DN range is (1000 - 1099)PRI Number is 4948 500 (500 - 599)For incoming calls on the Cisco DN'sI have configured belowTranslation Pattern ->Called Party Transformations-> Called Party Transform Mask to 10XXSo If someone calls 4948 501 i...
Am able to make outgoing calls to the PSTN but am unable to receive the calls from the PSTN.Out bound Call Flow:CUCM----->MGCP Gateway------->PSTN      = Outbound calls are fine Inbound Call Flow :PSTN------->MGCP Gateway-------->CUCM     = Inbound C...
Community Statistics
Member Since ‎11-25-2014 08:56 PM
Date Last Visited ‎10-09-2017 12:03 PM
Posts 15
Total Helpful Votes Received 4
Helpful Votes From
Helpful Votes Given To