Currently i have a 2 7845 Cluster CUCM 7.1.5 with 1500 users and i upgrading to a new CUCM 8.6 on UCS, however as i am also changing phones and some other client realte issues i need to migrate each user at a time, in other wordsI remove User 1 DN 10...
Currently i have a 2 7845 Cluster CUCM 7.1.5 with 1500 users and i upgrading to a new CUCM 8.6 on UCS, however as i am also changing phones and some other client realte issues i need to migrate each user at a time, in other wordsI remove User 1 DN 10...
I would like to know how does redundancy works on the VSM Solution and how do you configure it.I have 15 cameras with 1 VSOM Server and 1 VSMS Server, however what would happen if the VSOM Server Dies? does the archives stop recording?How can i add a...
hi GuysI just received 12 Cisco IP Cameras 2600 i was configuring them on the same port of my switch 3750-X and out of the 12 Cameras, 5 are sending me the next debug:*Mar 1 00:15:58.809: ILP uses DC Disconnect(Gi1/0/9): state= ILP_BAD_POWER_S, eve...
just received 12 cameras Cisco 2600 and 2 4500 after initial testing on a 3750X ( all on the same port gi1/0/9) out of the 12 cameras 2600 5 cameras cannot power on, the switch is sending a power Tstart error detected.Can it be possile to receive so ...
What parameters did you change, im also having this problem.When i ptt from any of my radios i dont light up the "in use" led on the e&m portSent from Cisco Technical Support iPad App
Interface Speed Local pair Pair length Remote pair Pair status--------- ----- ---------- ------------------ ----------- --------------------Gi1/0/9 auto Pair A N/A N/A Normal Pair B ...
