About UnivoiceLLC

UnivoiceLLC · 01-09-2014

I was wondering if there was a way to only allow my sip signaling ip yet the cisco allow media from ...

UnivoiceLLC · 01-09-2014

Thank you for the reply..call comes in as SIP from GIGE0/0 hits the dialer-peer voice 100 pots that ...

UnivoiceLLC · 01-09-2014

I have a cisco 3825 that I need the sip call leg entering the switch to be able to offer g729 curent...

UnivoiceLLC · 09-06-2013

I am using Aan IAD having a customer use the pots lines however it seems at times they hangup and pi...

UnivoiceLLC · 09-03-2013

Do you have an example config of this?

UnivoiceLLC · 09-03-2013

I was wondering if there was a way to give "fake ring" while call in progress so ther is no delay in...

UnivoiceLLC · 08-28-2013

I just did this and always have been in addition we do not have call control of any form we are usin...

UnivoiceLLC · 08-28-2013

That works but temporarily It seems to keep wanting to revert bnack to sccp even when I make the cha...

UnivoiceLLC · 08-27-2013

I am trying to convert my sccp spa508g to SIp I am currently using the spa50x-30x-7-5-5-recovery.exe...

UnivoiceLLC · 05-20-2013

I wanted to make calls to pstn in this matter:-SIP------->voice-port---------->pstn Does anyone know...

UnivoiceLLC · 05-20-2013

I wanted to make calls to pstn in this matter:-SIP------->voice-port---------->pstn Does anyone know...

UnivoiceLLC · 03-29-2013

Thank you for the quick replay I ahve done as you say and still having same issue I can post entire ...

UnivoiceLLC · 03-29-2013

I am trying to get PBR working porperly and have had no luck please tell me what I am doing wrong.. ...

UnivoiceLLC · 03-29-2013

I also tested by removing the match ip address statement and nothing

UnivoiceLLC · 03-29-2013

ok here is the latest made changes but nothing here is current config of interfaces in question.. in...

CISCO 3825