Hi All,Consider the following scenario:                   An IGP is running between D-SW1 and D-SW2. They both advertise the Routes 10.0.0.0/24 and 20.0.0.0/24 to each other. However, since these are also their CONNECTED ROUTES, therefore, because of...

I have a very basic question regarding PVST. Consider the following topology:My quiestion is that will SW2 respect/consider/will take any action/reply to the BPDUs it recieves from SW1 for VLAN1,2 and 3 as these are not activated on it? Same is for o...

Hi All,I have read in CCNP Switch book that we can use the MLS Switch to be used as a DHCP Server. However, we can define only one DHCP Pool on the switch. Now the question is that how hosts located on different VLANs get IP Addresses from the same s...

Hi All,When we use extended system id, the vlans can be identified because, Bridge Priority = Configured Value + VLAN Number. Thus the switch recieving a BPDU from another switch identifies the VLAN for which this BPDU is recieved.However, when we do...