About niranjandas

niranjandas · 12-02-2013

Hi,Back to forum after a long time. I have one issue to discuss regarding cisco 6001 switch. We purchased a new 6001 switch. Want to convert some of the Ethernet ports out of total 48 to FC to join the switch into a existing fabric. cisco Nexus 6001 ...

niranjandas · 08-23-2012

Hello,One of my 5020 port is going disabled due to excessive pause it is receiving.The Cisco switch disables the port and will recover from the error based on the recovery setting and recovery interval. Unfortunately the minimum interval is 30 second...

niranjandas · 08-13-2012

Hello All,I am experiencing a problem while trying to create port-channel interface. The interface did not come up. If i look at the show interface port-channel , c5548p-3# show interface port-channel 1port-channel1 is down (BPDUGuard errDisable) Ha...

niranjandas · 12-06-2011

Hi,I have seen a problem where in some virtual ethernet interfaces get binded with multiple physical interface and can not be seperatedinterface Vethernet100 switchport mode trunk bind interface Ethernet1/15 channel 2 bind interface Ethernet1/20 c...

niranjandas · 12-01-2011

Hi Experts,I am trying to connect two nexus 5020 with a 10G ISL link. Per my understanding, with new release 5.0.3 N2(2a) ISL link between two nexus switch is supported. Following is my configc5020-1(config)# show running-config int vfc 32!Command: s...

niranjandas · 12-03-2013

My current storage is on a VSAN to which Nexus 5548/5020 is part of. So if by any means, i can reach the same VSAN on Nexus 5548/5020 from Nexus 6001, my job will be done. I just need to have access to that VSAN where the storage systems are availabl...

niranjandas · 12-03-2013

Also, i came to know that as per 6.02 release note:"Support for DELL FEX Added support for the Cisco Nexus B22 Dell Fabric Extender for Cisco Nexus 6000 Series switches starting with the 6.0(2)N1(2) release."This is the exact reason we bought it. We ...

niranjandas · 12-03-2013

Vinayak, We bought this switch recently and it is an expensive one too. I would just need couple of more info. At the worst case we would have to return the switch.Does the 6001 support FCoE connections?Does the 6001 support FCoE ISL connections?Is t...

niranjandas · 12-03-2013

Thanks Vinayak for the response. Is this switch can be used or is it next generation FEX ? I also read some where in cisco the switch supports NPV. Without FC support, NPV is not possible. So i got confused there.

niranjandas · 12-03-2013

Has any body has some idea ? Eagerly waiting for a reply from cisco experts. Any documentation will also be helpful.

Member Since	‎11-07-2011 04:14 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	55

User Statistics

User Activity

Converting Eth port to FC port in a cisco 6001 switch

Is there any way to stop port from getting disabled because of “pauseRateLimitErrDisable”?

port-channel1 is down (BPDUGuard errDisable)

VN Tag vethernet interface get binded to multiple interfaces

Connecting two Nexus 5020 with 10G ISL link

Re: Converting Eth port to FC port in a cisco 6001 switch

Converting Eth port to FC port in a cisco 6001 switch

Re: Converting Eth port to FC port in a cisco 6001 switch

Converting Eth port to FC port in a cisco 6001 switch

Converting Eth port to FC port in a cisco 6001 switch