About dkblee

dkblee · 05-07-2012

hi! I've a switch (2950) with flat network with no configration at the ports. If i would to change the default vlan 1 ip address to a new network ip and default gw(different network segment from the existing one), because we are re...

dkblee · 10-31-2011

hi! What's the easiest way that allow me to have simple email notification of successful backup of cucm? i look through the options available in the call manager but did really see that available, except the snmp striing or syslog setup. Any idea how...

dkblee · 10-09-2011

hi! Is there any limit on the number of 3560 edge switches i can daisy chain using etherchannel? Currently i've 6 switches, i would like to connect another 2 switches. This setup is running on flat network. Thanks.

dkblee · 10-03-2011

hi! I've some queries about how mpls from the provider work. I understand that we'll be provided a router from the provider of the mpls line eg. AT&T, Orange, and etc, and the telco will be able to provide QOS from there. Here are my questions:1) Do ...

dkblee · 09-28-2011

hi! I've a wan interface that's 1000mbps in router A and another router that's connected to router A with port 100mbps. Can i fix both interface with speed 100 and duplex full for both sides? Will there be any issue?Thanks.

dkblee · 05-09-2012

hi! even if i cahnge the mgt vlan ip from eg. 192.1.1.1 to 10.1.1.1 which is of different network segment?

dkblee · 10-10-2011

hi! thx for the reply. To add on to the question above, Can i've a 4503 main edge switch with 2x 3506 edge switches or more from different closets with the uplink to the 4503 switch? This setup is in the flat network environment, with a firewall con...

dkblee · 10-05-2011

hi! i meant only one network segment in the branch office (it's a small office with less tahn 20 staffs), the HQ will have network with multiple segments and vlans. So, if that's the case, is the mpls gd to go? If possible i will not want to introdu...

dkblee · 10-05-2011

hi! If different segments are used within the network instead of flat setup. the interface from the optimiser to the sw, is it a layer 3 interface or just one of the vlan will do?As of " But if you want specific groups access this MPLS lnk then you ...

dkblee · 10-04-2011

hi! currently, the office is running on flat network with a vpn tunnel back to the hq through the internet line. If i would to replace the the vpn tunnel through internet with an MPLS line. Is it a must to have vlan configured internally within the ...

Member Since	‎06-23-2004 02:09 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	382

User Statistics

User Activity

quick question - mgt lan

cucm 7.0

switching question - 3560

mpls basic question

router port question

quick question - mgt lan

switching question - 3560

mpls basic question

mpls basic question

Re: mpls basic question