About David Castro F.

David Castro F. · 03-06-2020

Hello, It may be using the default route (route XXXX 0.0.0.0 0.0.0.0 X.X.X.X), that could be why it does not show which route it is using to route the traffic. You could do show route to verify this, Keep us posted, please rate all helpful posts, Dav...

David Castro F. · 03-06-2020

Hello Thierry, Yes, those n3ks support L3 features, vPC and so on, but it is all a combination of model, software version, and licenses. For example:Cisco Nexus 3132C-Z Switches Data Sheet● High availability◦ Virtual Port Channel (vPC) technolo...

David Castro F. · 03-06-2020

Forgot to mention, please use this PDF for best practices when designing and creating the vPC:https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf David Castro,

David Castro F. · 03-06-2020

Hello Nadav, Well lets start going through the vPC domain design first:1. The grey links between the two N9300's are for vPC keepalives and peer-link. I'm assuming these will be in the same port-channel of their own. If it is necessary to physically ...

David Castro F. · 03-06-2020

Hey Nadav, I hope you are doing great, So NTPv4 retains backwards compatibility with the older versions of NTP, including NTPv3 and NTPv2 but excluding NTPv1, which has been discontinued due to security vulnerabilities. So NTPv2/v3 are the official s...

Member Since	‎02-27-2016 10:33 PM
Date Last Visited	‎03-20-2020 12:07 AM
Posts	223
Total Helpful Votes Received	377

User Statistics

User Activity

Re: Firewall ASA5525 Routing Table

Re: Nexus 3000 switches

Re: Nexus 9300: Using vPC when the uplink gateway is a VRRP pair

Re: Nexus 9300: Using vPC when the uplink gateway is a VRRP pair

Re: Nexus 9k: NTP works only as v2 and not v3/v4