Hi,I want to check the continuity of DVI-VGA cable(of C40 codec) is being used to share PC in time of videoconference.Is there any process to check the continuity?
Hi Everyone..We have Cisco Aironet 1240AG Wireless AP's in out network. Now, we have some PC's, laptops and mobile phones connected with with this AP and all devices are working fine. Now suddenly from today when I am trying to associate some new dev...
Hello everyone..We have a Cisco 3845 configured as gateway router with H.323.Now , we have DID configured in our network. Our IP phones have 2 lines configured one for Internal VOIP calls and second for DID outbound calls.Now, problem is in the DID c...
HiWe have implemented DID in our network. We are having 3845 gateway router and using H.323 as gateway protocol. Now the problem is when someone is calling from outside to a DID number the call is coming and caller id is visible but when a call is ma...
Hi,We have CUCM 7.1.3 in our network. Now due to some network changes we need to change the IP address of many IP phones in many location. Now we are using static IP address in our network. The problem is that I am trying to change the IP address fro...
Hi, one more thing...I have created 2 rules - voice translation-rule 1 rule 1 /2213..../ /&/ rule 2 /[9][0-9]......../ /0&/In rule 1 , when I will call from a DID number (2213....), it will be translated to the same number (&).The translation output ...
Hi thanks for your reply...From ISP end they had provided us with 22139501 - 22139800 DID numbers.As DID caller ID is not working so, for testing purpose I have created another POTS, does that require, if not what will be the correct one.Now, our ext...
Thanx guys for all the advises....Can you just tell me one thing... like if I have a phone with 2 lines one for my internal calls (VOIP) and other for DID (PSTN). For DID line I am using 9.! , do I need a translation pattern?? If yes why??Line 1 (VOI...
