Jeffrey Keown

Hi John,specifically what model of 1100 ap is this?If it's an 1121(no console) and you're unsure of ...

Jeff,what make is this ap?  d-link?

Hi Fidel,Please see responses inline:1. Does the WLC2112 has built-in support for allowing Guest Acc...

Hi Lee,If you're replacing it with the same type of controller, you can upload the config via the co...

telnet or ssh into the controller and run a debug client while one of the problematic clients is att...

you may want to go with a later version of 12.2(18)SXF code, as it supports auto lag:http://www.cisc...

Hi Jeff,I don't see a default gateway configured on the ap.looks like it should be 192.168.1.1

heh heh, no worries happens to the best of 'em.glad to hear that you got things working

Hi AS,Assuming that your AP's are in the default mode local, here's the general idea on packet flow....

Hi Kamil,Have you associated other types of clients with these AP's? If so, do they perform better?Y...

Hi Pawel,Assuming that your AP's have some source of appropriate power, any type of switch should wo...

Hi,As a sanity check, have you tried sniffing the controller's switch port (or the wism's channel) a...

WLC's have 'dhcp proxy' enabled by default. This mechanism is similar to the 'ip helper' address con...