hello all,i've created new customer signature to reset for tcp string with testattack.for testing, i've configured telnet password using testattack on router's line vty.i've tried to connect to the router with testattack password.i can see the popup ...
hello all,i have a problem with ebgp with md5 through pix7.1.as you know, to pass bgp with md5 traffic for the pix6.3, i should configure a special configuraiton. it's norandom sequence number at the static nat configuraiton.static (i,o) 1.1.1.1 1.1....
Hi all,I have a question about supportting maximum speed on FWSM.Cat6500, which contained FWSM on the chassis, connect to internet over 300Mbps bandwidth.When i connect laptop using 1Gbps Lancard to test innternet speed from outside interface of FWSM...
Hi all,after installing WLC, WLC can't adjust 802.11a channel eventhough AUTO RF was set. So All APs adjust it's channel value with 149 and 1 (maximum power level).Please let me know how can i check?Regards,John.
Hello all,There is something wrong with my voip network.I have callmanager(4.1) and Voice G/W(cisco2600).When i try to make a call from IP Phone(7940) to Cellular Phone, I can't hear music bell. music bell is seviced by mobile telecommunication compa...
Hello,the ips configured promiscuous mode.i also setup span on switch.only one interface which is gigatbit 0 is using for sinffing interface.i didn't configure alternate tcp reset interface on ips.reagards,john.
Hello Rob,Thank you for your helping.I totally understood what did you told me.However why i can ping to WLC older version(airespace os)?Please let me know.Regards,John.
Thank you for helping.I have Cisco IPVC 3511 MCU with 4.0.2(latest version)As you mentioned, i have to configure continuous presence funtcion for SCCP.Is it possible?Regards,John.
