*Jul 17 10:31:35.615: %FABRIC-5-FABRIC_MODULE_BACKUP: The Switch Fabric Module in slot 4 became standby*Jul 17 10:31:42.439: %OIR-6-PWRFAILURE: Module 5 is being disabled due to power convertor failure. PMB registers are dumped as follows, R0= 0x0, R...
Hi ! I have stack of 4 Switch 3650 when ever the power goes and come back the switch goes in Switch mode i manually need to boot the Switch , i have tryed to erase and load new IOS still the problem exist.
How to recover switch in stack (one of my ...
If the switch is not getting stack just because of the IOS version.There r 2 options to get in the stack.1) Remove the switch from a stack and upgrade it to the same version of the master switch.2) If u don't want to remove from stack run the command...
Dear Manish,
Thanks for your reply i have downloaded this is file inmy labtop and make my labtop as TFTP server , still it dont take file from my labtop tftp server all antivirus and firewall is disable i can ping each other.
I use another meth...
Dear Mr.Aman,
Thanks for your reply . I got only the device as the cucm is in another countery so i have no idea
I have 10.2.3 version need to upgrade it to 10.5 to get express way working.
Thanks
