trombidz1

trombidz1 · 12-30-2008

HI , I am experiencing the same problemanyone knows how to clear the status after a problem is ackno...

trombidz1 · 05-26-2008

Hi,I understand that in VSS 1440 mode, there are some line-card and service module considerations.I ...

trombidz1 · 05-21-2008

you'll need to L2 VLAN off your internet on your core switches . Why it's not good ?

trombidz1 · 05-21-2008

you'll need to L2 VLAN off your internet on your core switches . Why it's not good ?

trombidz1 · 05-21-2008

you'll need to L2 VLAN off your internet on your core switches . Why it's not good ?

trombidz1 · 05-21-2008

Dear bothmany thanks for your comments.What do you mean by " you'll need to L2 VLAN off your interne...

trombidz1 · 05-21-2008

Hi,The FWSM does not include any external physical interfaceswhat are the risks ?

trombidz1 · 02-08-2008

Hi Ok thankslast one :is it possible to put to different access-group on an interfaceinter fa 0/0ip ...

trombidz1 · 02-07-2008

ok I clarify10.1.1.1 is in vlan 599source is 10.1.1.1 destinations are 10.2.2.2 and 10.2.2.3my acl i...

trombidz1 · 02-07-2008

ok How about if I have another host 10.2.2.3 on the remote site ? will the traffic be blocked from 1...

trombidz1 · 02-06-2008

Hi.I would like to only allow some traffic between a couple of servers on a VLAN and on a remote sit...

trombidz1 · 01-21-2008

thanksregarding your edit , It would be easier to start with the denied sub as I have too many to al...

trombidz1 · 01-21-2008

Ok I explain it better and start :Imagine I have 6 subnets ( In fact I have more and this is why I w...

trombidz1 · 01-21-2008

correct i made a typo , it's acl 101and I also made mistake with the wildcard mask.I had a problem t...

trombidz1 · 01-21-2008

Hi,Could you confirm I CANT do that :access-list 101 deny 10.1.1.0 0.255.255.255access-list 101 deny...

Re: netmanage IP