Hi,Sorry to make it long. We are in a progress setting up QoS on our branch LANs.In general we have a routing switch (3750 ip services) and access switches (3750 stack with ip base) connected to the routing swich using etherchannel.Routing switch is...
Hi,I'm almost clear how to configure the Wireless guest using anchor controller however I have a question.I have a centralized WLC and APs spread across locations in H-REAP mode.I have few upcoming sites requiring local WLC due to number of APs on si...
Hi,I have the following problem with IME:I have 5 AIP-SSM10 managed through IME and out of the 2 show older signature version (387) on the dashboard however when I query the status it show tha latest (397).Had someone similar issue?Thanks,Kris
Hi,I have the following problem.I have two 3560E switches connected to each other through a 6M leased line.I want to set up Qos which considers that 6M is the leased line speed.What I thought is:apply srr-queue bandwidth limit 10 on the egress interf...
Hi,I have the following challange and I can solve it partially only.Scenario:I need to connect two sites through ipsec L2L and apply some NAT back and forth.The remote network is 10.1.0.0/24 my inside network is 192.168.1.0/24. The remote site cannot...
Hi,Not sure what you want to achieve whether you want an outside host with ip x.x.x to appear as y.y.y.y to the inside?If so you need to configure outside NAT.Please take a look at this link:http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/g...
Yeah, that's the curse of low end switches. If something is cheap then you have to live with all these kind of issues. Not like higher end products wouldn't have nice bugs.I'm hesitating to offer this model for our client, but if it is not resolved a...
Hi Mel,Strange indeed.Do you see any matching for the classes on the inside interface policy map?If so it means the classification and marking is done.Might be a silly question but are you sure that the traffic leaves the interface as it should.Regar...
Hi Edison,The TOS 72 is binary: 01001000 which is AF21 (010010) . I have tried it out with a simple policy map and class to match the AF21.I was pinging with TOS 72 and it was matching.Regards,Krisztian