About zanub

zanub · 06-10-2008

hi ankur,below the config of vlan..both switch has similar config..interface Vlan70 ip address 10.19...

zanub · 06-10-2008

Hey all,One of my switches has gone to HSRP standby mode, even though i removed the connection to th...

zanub · 06-02-2008

literally gateway of last resort..if router does not have a route to the destination network, then u...

zanub · 06-02-2008

hi all,just some basic vtp questions..always a bit scary when connecting switches with each other..;...

zanub · 05-28-2008

niranjan,then why would i prefer mpls over dsl.i know it will gurantee a bandwidth..but i keep on he...

zanub · 05-27-2008

Hi,One very basic question. We have a MPLS line to a remote site and a DSL line to the same remote s...

zanub · 05-26-2008

Hi all, a simple question i guess..but need confirmation..we have configured vlans on my l3 switch a...

zanub · 05-26-2008

No routing protocols planned. only static routes. i guess i can have static routes for all the priva...

zanub · 05-26-2008

Rick,All the initial 3 questions you asked has been confirmed already. Correct DHCP server ip addres...

zanub · 05-26-2008

Rick,As of now we have one default route pointing to the MPLS. So i guess we will have to remove tha...

zanub · 05-26-2008

Hey all,I'm facing issues in getting an ip address from a DHCP server in a central site. ip helper-a...

zanub · 05-26-2008

Rick,Thanks for the quick reply..The 3560 switch is operating as L3.Ip routing is enabled.ip classle...

zanub · 05-26-2008

Hi All,Is it possible to configure 2 gateways or 2 default routes on a switch.The setup is we have a...

zanub · 08-07-2007

nope..i guess its something wrong in the way i'm installing the certificate in the servre machine..i...

zanub · 07-29-2007

hi,acutally i'm still facing the issue. still not able to connect with certificate installed..dont k...

Re: hsrp issue