About Kevin Brennan

Kevin Brennan · 07-24-2013

Hi All,Is it possible to use a prefix list to remove a specific network from a summary advertisment that was received from a BGP peer?Example:I receive 192.168.0.0/22 from an EBGP peer. I want to filter out only 192.168.0.0/24 whilst still allowing 1...

Kevin Brennan · 11-09-2010

Hi All,Does anybody know if there is a way to disable SNMP traps being sent for specific HSRP groups?In my scenario, I have a number of routers that have multiple HSRP groups defined. Two HSRP groups from each router are in a INIT state because the s...

Kevin Brennan · 06-03-2010

Hi All,I was wondering if anyone can clarify if the NM-1FE2W or NM-2FE2W will work in the 2610XM?These two pages seems to contradict each other:http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.htmlhttp://w...

Kevin Brennan · 05-19-2010

Hi All,I did a little bit of re-configuring in my lab and came up with a problem with two NM cards.Both cards are labeled as NM-4A/S on the back panels. From cisco.com, both should work in my 3620's and 2651XM'sBoth cards work in the 3620, but one of...

Kevin Brennan · 02-11-2010

Hi All,I am in the process of setting up a new Microsoft NLB web farm. I've only ever configured this before on a single switch so I'm looking for a sanity check on the setup for two switches.I have 2 web nodes, both running Microsoft NLB in multicas...

Kevin Brennan · 07-25-2013

Hi All,Thank you for the assistance. Inject-Map can help me out here.RegardsKevin

Kevin Brennan · 07-30-2010

That's me out of ideas then!Kevin

Kevin Brennan · 07-30-2010

Hi Tom,I've never worked with these interface modules, but is it possible that you have to set a clock on one side of the back to back circuit? (In the real world, this clock would be provided by your mw cpe)A quick search turns up "atm clock interna...

Kevin Brennan · 07-29-2010

Hi Jigar,If you view the connection manager "View" --> "Connection Manager". Create a Telnet/SSH session for all of your devices (only need to do this once) then save it.Right click on the Telnet/SSH folder and select "Connect All" You have to re-arr...

Kevin Brennan · 07-29-2010

Hi Jigar,Putty Conection manager might help you here (http://puttycm.free.fr/cms/)You create a database of all your routers and then connect to the database - this opens a session to all of them. there's a command sender built into PuttyCM.Only for ...

Member Since	‎06-10-2008 03:16 AM
Date Last Visited	‎08-31-2018 02:10 AM
Posts	129
Total Helpful Votes Received	34

User Statistics

User Activity

How to remove a BGP route from a summary

SNMP Traps for specific HSRP Groups

Network Modules and 2610XM

NM-4T and NM-4A/S

Static MAC address entry and MS NLB

How to remove a BGP route from a summary

Re: Problem linking NM-1A-E3's back to back

Re: Problem linking NM-1A-E3's back to back

Re: Putty Commandsender - [use]

Re: Putty Commandsender - [use]