About tsgruu2000

tsgruu2000 · 08-04-2023

We have to allow SHA1 in ISE. This causes an application restart and therefore we expect a downtime of 10-15 minutes of each node.The deployment consists of 2 admin nodes and 2 PSNs. Are both PSN nodes restarted at the same time or is there an order ...

tsgruu2000 · 03-10-2023

We set up a single DNAC using only the enterprise port and cimc.When it comes to NFS Backup, traffic has to traverse a firewall if it leaves the enterprise port.Which port does NFS take by default and is there a way to use another port than enterpris...

tsgruu2000 · 09-21-2022

Hi all regarding the compatibility matrix https://www.cisco.com/c/dam/en/us/td/docs/Website/datacenter/fexmatrix/fexmatrix.html the old FEX N2K-C2248TP should work with C9336C-FX2. Unfortunately this FEX model is not available for provisioning. Will ...

tsgruu2000 · 09-07-2020

Hi All,We got access points with static Tags assigned. In Prime Infrastructure 3.8 I can see the Tags but I cannot find a way to edit them through Prime? The Tags are displayed in Device Details. Does anybody know if this is possible?Thanks,Regards,U...

tsgruu2000 · 08-26-2020

Hi all,I wonder if there is a command to see the number of dropped packets in Cat9k.I cannot find the corresponding command to this one used int Cat3k:show platform port-asic stats drop Regards,Urs

tsgruu2000 · 11-10-2023

To just fix the address you could take something like this: {% for interface in __interface %}{% if '161' in interface.ipv4Address %}{% set mgmt_vlan = interface.vlanId %}vlan {{ mgmt_vlan }}name Mgmt!ip route 0.0.0.0 0.0.0.0 {{ gateway }}!int vlan {...

tsgruu2000 · 03-13-2023

Dear M. I'm afraid my question is malformed. Table 3 shows protocol ports and not physical ports. What I want to do is send NFS traffic through another port than the enterprise port to bypass the firewall. In theory this should be possible using a st...

tsgruu2000 · 09-26-2022

The FEXes are online now. I just configured the fex ports and connected them. After the image upgrade they were ready to be configured.

tsgruu2000 · 09-23-2022

provision does not work, even with listed hardware. Next week we are going to connect our FEXes and hope, they will come online. I'll post an update once they are installed.

tsgruu2000 · 09-23-2022

I Opened a SR. The answer was:Unfortunately, the N9K switches, unlike N5K, do not support pre-provisioning. Even if 2248TP-E were present in the list, this wouldn’t have helped you.

Member Since	‎12-14-2005 01:21 AM
Date Last Visited	‎03-20-2024 12:30 AM
Posts	53
Total Helpful Votes Received	10

User Statistics

User Activity

ISE Cluster Application Restart downtime

DNAC NFS Backup NIC

C9336C-FX2 FEX provisioning N2K-C2248TP-E-1GE not possible

Prime Infrastructure WLC9800 AP Tags

Catalyst 9000 dropped packets

Re: Changing IP Address From DHCP to Static Using Onboarding Template

Re: DNAC NFS Backup NIC

Re: C9336C-FX2 FEX provisioning N2K-C2248TP-E-1GE not possible

Re: C9336C-FX2 FEX provisioning N2K-C2248TP-E-1GE not possible

Re: C9336C-FX2 FEX provisioning N2K-C2248TP-E-1GE not possible