Hi, Before that you please put in the picture that "are you using any tacacs+/radius for accessing the Router?" If not, you just add the following with my previous command. ! aaa authentication login default local aaa authorization exec default local ! Thanks, Goutam ... View more

Hi, As per my knowledge the following will be sufficient to access SDM/HTTP/HTTPS #ip http server #ip http authentication local #ip http secure-server #ip http timeout-policy idle 5 life 86400 requests 10000 #username [name of user] privilege 15 secret [password] Thanks Goutam ... View more

Hello Sai, At our "Datacenter Env" we have deployed the yyy value min 200. And it is working fine. Thanks Goutam ... View more

Hi, As per my knowledge, the following is sufficient to run a normal HSRP, ip address standby timers 3 9 standby 1 ip standby 1 priority xxx standby 1 preempt delay minimum yyy Best of Luck! Goutam ... View more

Hello Jaideep, CCO Login:Cisco Connection Online Login, those have a valid service contact (Partener, CCIE etc) with Cisco they can access some internal document, IOS etc. No, you cannot download the same. Suggesting you to contact your service partner or to contact the vendor, where from you have purchased the same. They can help you only. Or you can take a help form Cisco TAC (Technical Assistance Center) by opening a service request. Thanks Goutam Pls rate if it helps!!! ... View more

Hi Jaideep, You need a valid CCO login for access/download IOS. If you have a valid service contact with Cisco then you can also download the same. Else contact your vendor/suppliers for the same. Thanks Goutam ... View more

Hi, You can visit the following: http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp Thanks Goutam ... View more

Hi,Can you post the log file of the router?Thnaks, Goutam. ... View more

Hi, Hope you have checked BUG issue with the IOS. If so then pls do the following. #conf t #boot system flash flash:c870-advipservicesk9-mz.124-15.T5 ctrl^z #wri #reload Hope it will work Thanks Goutam [pls rate if it works] ... View more

Hello, You can check your requirements to the bellow link: http://www.ciscowebtools.com/productadvisor/routers.asp Thanks Goutam ... View more

Hi, You can visit the following links for details. Product Advisor: http://www.ciscowebtools.com/productadvisor/routers.asp Cisco Router Details: http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_brochure0900aecd8019dc1f.pdf Cisco Switch Details: http://www.cisco.com/en/US/prod/switches/ps5718/ps708/networking_solutions_products_genericcontent0900aecd805f0955.pdf Thnaks Goutam [pls rate if it helps you] ... View more

Hi, You can visit the following http://www.cisco.com/en/US/prod/switches/ps5718/ps708/networking_solutions_products_genericcontent0900aecd805f0955.pdf Thanks Goutam ... View more

Hi, As per cisco: Another system is using your IP address and Recommended Action: Change the IP address of one of the two systems. Additionally we found the same log at our LAN Network when switching loops had occurred. Conform that your network is loop free. Also if you have configured "HSRP", please check the entire configuration. Thanks Goutam. [pls rate if it helps] ... View more

Dear Umesh, Please inform that whether are you using any NTP clock source? If yes, then pls confirm that your router is properly connected with NTP server / source. Else it will not work properly. If the router is using local time then it will active as per the mentioned time, otherwise it will show inactive. Also please try the following: 1.deny tcp any host 172.16.0.1 [port_number_for_your_proxy] time-range internet 2.int serial [interface number] 3.ip access-group strict out [Your mail has been replied with the same] Thanks Goutam ... View more