All, is IGMP Global or Locally? The reason I ask, we are looking at an cisco ie 3000-8tc as a layer 2 switch attached to our 3750 stack. Can the 3000 do snooping within the swtich itself, or must the 3750 stack have IGMP Snooping enabled too?
All,I had an ASA hardware failure. I have the replacement box in, loaded the config. I can SSH into the box as well as SSLVPN, however, IPSEC (using VPN Client 5.0) does not work. How do I fix?
Hello. A quick question regarding call park in v.7.1. How can I extend the length of time that a call can be parked? on v4 we had 3 minutes approx, however right now on 7.1 we are only at 1 minute. Thanks for your help.
has anyone used ultravnc instead of vnc to remotely access servers after connectiong through WebVPN? The issue I have, is that we use Ultravnc on our servers that requires a username and password from an AD Group. With tightvnc that is in the ASA, I...
but if i dont have IGMP Snooping enabled on the 3750, can devices on the 3750 register to the 3000? if not, then does multi-cast traffic leave the 3000?
The IGMP quierier function will be on the L2 (IE 3000 Switch). If I want to contain the multi-cast traffic generated on vlan 199 of the IE 3000 switch from showing up on vlan 199 of the 3750 Switch without IGMP Snooping enabled.. What must I do?
the IE 3000 switch would be the switch that the multi-cast source is at....sending information to othermulti-cast devices in that switch, BUT sending to a specific IP on the 3750
so If I want to restrict multi-cast traffic from leaving the 3000, do I enable snooping on the 3000 and not the 3750? do I enable it on the 3750 so that when muli-casts are send from the 3000, they dont hit the 3750? The goal is to control the mult...
So if I enable IGMP snooping on the Ie-3000 for VLAN 199, but do not enable IGMP Snooping on the 3750 for vlan 199, only the device on the 3000 will get the snooping information, however the device on the 3750 without IGMP Snooping, will still contin...
